Joyful News Continues to Flow! DAH Solar Awarded Rare Accolade As EUPD “Top Brand PV" Again! In Intersolar South America DAH Solar received EUPD Research’s “Top Brand PV in 2023” in Brazil. This is the second time that DAH Solar was awarded in this area since 2022. EUPD granted DAH Solar the seal in the “Modules” category. EUPD Research Vice President Daniel Fuchs presented the award and congratulated DAH Solar, recognizing DAH Solar’s competitive advantage in the global PV market. As one of the most authoritative market research organizations in the global photovoltaic industry, EUPD Research is known for its decades of research experience and unique evaluation models that stand for utmost quality and objectiveness. The selection criteria for this award are based on different dimensions of solar installers and real users’ feedbacks, including product quality, customer satisfaction, brand loyalty, and recognition etc. Brazil is one of the fastest-growing PV markets over the world, due to its abundant sunshine conditions and the implementation of the "National Energy Plan" through local government. Brazil has always been regarded as a key market for DAH Solar. Through years of local market development, DAH Solar has consistently ranked among “The top three photovoltaic influence brands in Brazil” for several consecutive years, which proved it has industry-leading technology, management, and customer value standards in the minds of its local consumers. In the future, DAH Solar will continue to increase investment in localizing its business, delivering the most cost-effective solar technology and highest quality products to South American partners.

Stunning Appearance In Brazil| DAH Solar Leading off InterSolar South America 2023 The largest and most influential solarPV exhibition in South America, the InterSolar South America 2023, was held on August 29th to 31st, in Brazil. DAH Solar exhibited its global patented products, including the Full-Screen PV Module 2.0 series and the world’s first integrated PV system SolarUnit , showing its innovation strength to the global visitors. The Full-Screen PV Module-NO Cleaning,Higher Power Generation The Full-Screen PV Module are becoming well-known by users, due to its 6-15% power generation growth ability. This data is not only supported by TÜV outdoor empirical report, but also proved by more than 8,000 Full-Screen PV Module power station cases. At this exhibition, the new upgrade of Full-Screen PV Module 2.0 serieswere equipped with industry-leading N-type TOPCon Solar cell technology, integrating higher power generation, higher conversion efficiency, lower temperature coefficient and decay rate, etc. Moreover, The Full-Screen technology can perfectly adapts to different types of power station and application scenarios. With its outstanding structural design and Precisely±0.1mm Production Accuracy , The Full-Screen PV Module 2.0 series have become the focus of the exhibition. The Integrated PV System SolarUnit:The Industry-leading conversion efficiency The world’s first integrated PV system SolarUnit is a standardized product specially developed for small distributed and household photovoltaic applications. It combinesTOPCon solar cells, EVA adhesive film, 3rd semiconductor GaN and others high-tech materials to make sure the maximum system efficiency could achieve97.55%. Besides, with its advantages of unitization design and easier system installation, The SolarUnit has won increasing popularity among users. In addition, it is also equipped with remote monitoring and one-click shutoff functions to make PV power stations smarter and safer. DAH Solar has won EUPDResearch“Top Brand PV”award for two consecutive years N-type TOPCon Solar Cell Technology: Constantly Breaking Industry Records Currently, the new era of PV industry has coming, Most of global PV corporations are facing huge challenges and a mount of opportunities. With its leading advantage of the PE-poly technology, DAH Solar has completed a integrative PV production supply chain which includes the silicon wafers, solar cells, PV modules and microinverters. In addition, themass productionaverage powerconversion efficiency ofN-type TOPCon Solar cell has achieved 25.8% and is about tobreak through 26%, continuously creating new industry records. Global industrial layout: Deep Cultivation In Brazil, Localization Strategy Continues To Advance DAH Solar’s products are sold in more than 120 regions worldwide, with a total of more than 120,000 customers. After seven years of deep cultivation, the brand awareness rank among thetop three in the Brazilian mar...

Ranked BNEF Tier 1! DAH Solar Was Awarded The List Of Global First-tier PV Module ManufacturersModule Manufacture in Q3 2023, on 21st August. DAH Solar is on the list by virtue of its unceasing technology innovation ability, the accountability of the brand influence and high-quality product, and abundant bankability. DAH Solar gains recognition around the world. Currently, DAH Solar has formed its innovation-leading and technology-driven path for its cultivation in the land of photovoltaics. Authoritative certification, well deserved! DAH Solar’s innovations continue to be fruitful! BloombergNEF PV Module Tier 1 list methodology is a tiering system for PV module products based on bankability, to create a transparent differentiation between the hundreds of manufacturers of solar modules on the market. BNEF Tier 1 has been recognized as the 3rd party standard for verifying PV module supplier qualification ratings. Also, It is an important judgment basis for investment in many global PV projects. Due to its neutrality and objectivity, BNEF Tier 1 is widely accepted as a reference in industrial analysis. DAH Solar as the leading “inventor” in the PV industry has differentiated us from the market through innovational competitive advantages. After years of research and development of high-efficiency and high-quality innovative and exclusive global patented Full-Screen PV Module and the pioneering integrated solar system SolarUnit. Meanwhile, DAH Solar with the foresight to lay out the TOPCon solar cell technology. DAH Solar TOPCon solar cell (PE-poly route) has achieved an average conversion efficiency of 25.8%, and will soon exceed 26%, continuing to maintain its leading position in the industry. DAH Solar is listed on the BNEF Tier 1 because of its technological innovation, stable and healthy financial situation, and its in-depth industrial integration layout. This result is also the recognition by professional research institutes and global markets towards DAH Solar’s technology innovation strengthening and brand influence. In the future, DAH Solar will persistently increase its investment in technology creation and bring greater value to global energy users. DAH Solar has the ultimate goal of accelerating the global energy structure transformation and providing our very help in meeting the global carbon-zero ear.

The Integrated 7GW PV Projects Of DAH Solar Will be Located in Shanxi On July 19th, 2023, DAH Solar Co., Ltd. and Jinzhong Development Zone Management Committee of Shanxi Transformation Comprehensive Reform Demonstration Zone, held the signing ceremony of the " DAH Solar Industrial  Integration: 7GW PV Projects". During the ceremony, we discussed the further development of renewable energy in Jinzhong City and signed a formal contract for the project. This project plans to cover a total area of about 400 acres, to build an integrated industrial distribution of 7GW of mono-crystal silicon rod, 7GW of high-efficiency N-type silicon wafers, 7GW of high-efficiency N-type solar cell and 7GW PV Module, with a total investment of about 5 billion RMB. This successful signing symbolizes that the cooperation among the DAH Solar, Jinzhong Development Zone, and China Three Gorges Corporation Shanxi Branch has risen to a new level. As a leading player in N-type solar cell technology, DAH Solar has rapidly laid out the N-type distribution since mid-2022. In May of this year, DAH Solar’s N-type TOPCon solar cell manufacturing base set a new speed recordfor efficiency and yield production of the TOPCon solar cell production line within 23 days, showcasing its impressive technical strength and innovation-driven development within the PV industry.

DAH Solar Module Manufacturing has been Comprehensively Upgraded At the beginning of 2023, DAH Solar completed the module production factory upgrade. As an innovation-driven and technology-leading solar manufacturing company. DAH Solar always focuses on improving manufacturing efficiency and quality control through production technology improvement. Currently, DAH Solar has upgraded its production process by bringing in high tech talents and advanced equipment. DAH Solar optimized serval production processes, like EVA positioning control, welding, automatic inspection, and water cooling. The result of this investment is very surprising. DAH Solar has achieved a new production speed that producing one module only takes 16 seconds instead of 22 seconds! For EVA positioning control, this process is to settle the EVA on the module for bonding the solar cells and the back sheet. This improvement could make sure the overall overage so the EVA sheet won’t shift in the later process. Besides, the welding procedure improvement is very significant. DAH Solar changed the old welding method. Now the welding is through heating the bus bar instead of directly heating the solder strip. For the TOPCon module, the solder strip is even thinner. If directly heating the strip, it has greater odds of causing the solder strip breakage. Heating from the bottom of the bus bar could perfectly solve the problem because the bus bar could balance the heat conduction. Also, the water cooling machine could help the module decrease the temperature after the EVA melting process. As we all know, after the EVA melting procedure, the module could reach to 140℃. Without the cooling system, it needs to take a longer time to reach the next step of operational temperature. Before it gets cool down, lifting the module could deform the glass and the solar cell, in some extreme cases, the glass would even be broken. DAH Solar introduce an advanced cooling system, which will shorten the cooling time and decrease the temperature to 25℃. This will help increase the production efficiency. During this visit, a direct phenomenon could be observed, which is the number of workers has decreased. The production manager Mr. Wang claimed that the DAH Solar module factory has accomplished fully automatic production, which means the production is getting more and more accurate and the requirement of workers are more strict. Mr. Wang said DAH Solar has upgraded all the inspection equipment. In the past, some inspections relied on visual inspection but now it changed to autoscan and the program will automatically check the quality. All in all, DAH Solar upgraded its production line to a more preciously, more efficient, and fully automatic. With those improvements, DAH Solar could achieve an annual module production capacity of 7GW+. More and more automatic equipment significantly increased production efficiency and better control of production details. DAH Solar commits to delivering high-quality solar ...

DAH Solar Continues To Create MiraclesWithin only 23 days, DAH Solar set a new record for the efficiency and yield production speed of the TOPCon solar cell production line. DAH Solar's TOPCon PE-poly production line (SE not included) achieved an average mass-production conversion efficiency of more than 25.4%, and the solar cell yield rate exceeded 97%, which is the leading record in the PV industry. This is also the fastest TOPCon production line to reach this indicator in history. DAH Solar has set a new record in the industry. DAH Solar, as a global technology-leading PV company, steps into TOPCon solar cell manufacturing for the first time and achieved such success, which fully reflects the professional level and execution efficiency of DAH Solar's TOPCon solar cell team. At the same time, it fully demonstrates that DAH Solar has always adhered to technology innovative development strategy and the long-term technological accumulation has once again interpreted the " speed of DAH Solar".